Share and Contribute to our blog

Enjoyed Your Service? Please visit our Google Plus Page to leave a Review.


Rolling Steel Service Doors - Regular Duty

SEE ALSO: Rolling Steel Doors - Medium Duty

  • Constructed of readily available materials and easily serviced components while embracing the idea of user-friendly products that incorporate durability, simplicity and serviceability as common standards.

  • Practical innovations are enhanced by the esthetic appeal a Clopay door adds to any building exterior, combining maximum security with modest operating costs.


OPTIONS

  • Aluminum, stainless steel curtains, guides and bottom bars
  • Universal brackets for hoist and gearhead operators
  • High cycle spring and operation designs
  • Safety reversing systems
  • Windload upgrades
  • In-house powder coating & finish upgrades
  • Operational upgrades
  • Large run paint color specials
  • Access control upgrades


COLORS

Clopay's rolling steel doors come standard in a choice of five colors: orange, tan, white, gray, bronze, plus Galvalume®.

Each standard color is a two-part baked-on system that has been formulated to withstand the most stringent conditions. Our standard paint finish has a 25 year film integrity warranty, guaranteed to hold up against peeling, cracking, blistering, flaking, splitting or delaminating.

These colors are also guaranteed not to fade or change color for 25 years.* Standard colors are not available on all slat styles or gauges. Color chips are available on request.


MODELS

CSD10 - The cornerstone of the Clopay rolling steel line. All service doors in the Clopay line owe their basis to this design. CSD10 doors are available with three slat profiles in flat and curved configurations. Structural steel guides and bottom bars are standard features and are protected with the durable Clopay powder coat finish as standard. High standard cycle life and aesthetically pleasing structural hood design set the Clopay Model CSD10 in a class of its own.

CSD20 - A fully weatherstripped version of the CSD10 when an insulated curtain is not required, but wind and debris may be kept outside. Hood baffle, vinyl blade guide seal and soft, wide bottom bar astragal are standard on this model.

CID25 - A new pinnacle in insulated service door design. The CID25 clearly demonstrates that combining the high yield insulating qualities of polyurethane with reduced weights and enhanced operational abilities can produce a truly high performance industrial product. In addition to insulation, the CID25 is fully weatherstripped with a hood baffle, vinyl blade guide seal and soft, wide bottom bar astragal. The CID25 matches the CSD20 in operational and life-cycle characteristics with an efficient and full duty service life.

MAIN FEATURES

  • Four available slat profiles: flat, insulated flat, large and small curved
  • Guides, headplates, brackets and components are shot peened, powder coated and baked to an extremely durable, standard black finish
  • Guides feature service cutouts for faster, safer curtain installation and service
  • Components receive an etched serial number during manufacture for permanent field identification
  • Double angle structural steel bottom bar with rubber astragal for a positive floor seal
  • Unique, structural half hexagonal one-piece hood is rigid and easier to handle and install than older style round hoods
  • Chain hoist operation is standard with motor or manual operation optional
  • Chain hoist assembly is available in roller chain or cast iron gear preferences
  • Operational choices are easily and inexpensively upgraded in the field due to unique headplate transition bracket designs
  • Headroom issues are minimized by optimized headplate sizes
  • Stress relieved, permanently lubricated 20,000 cycle springs with 50,000, 75,000 and 100,000 cycle options available
  • Five standard baked finish curtain finishes: orange, tan, white, gray, and bronze, plus galvalume®
  • 188 standard powder coat color options
  • Three year warranty on workmanship and materials is standard
  • Nationwide dealer network ensures professional installation and maintenance of Clopay commercial products
  • Clopay rolling steel products utilize a high percentage of recycle content in their manufacturing and packaging and are entirely recyclable at the end of their life cycle

SPECIFICATIONS

Curtain: Prefinished 24, 22, 20 and 18 gauge galvanized steel interlocking rollformed slats in F8265 flat (2.63" x .66"), FI265 (2.65" x .66"), C8265 (2.62" x .66") or C8187 curved (1.97" x .53") profiles. Curtains are laced and locked on a stateof-the-art lacing table. Curtains available as noninsulated or insulated with a polyurethane core and a 24 gauge back cover. R-value = 7.6 as calculated by ASHRAE Standards.

Endlocks and Windlocks: Plated malleable cast iron or nylon to provide a wear surface for curtain slats and windlocks as required per design to meet windload code and specifications.

Bottom Bar: Powder coated steel angles bolted back-to-back, with tubular compression weatherseal or optional safety reversing sensing edge. Extruded aluminum mill finish. T-type is optional up to 16'4" width.

Barrel Assembly: Steel pipe, sized to limit deflection to no more than .03" per foot of width, with graduated rings or lugs welded to barrel for curtain attachment.

Springs: Torsion springs, permanently lubricated and mounted on steel tension shafts; designed for 20,000 cycles minimum.

Headplates: Rectangular powder coated steel plates of suitable size to support barrel, curtain, drive and hood assemblies.

Weatherstripping: F8265 and F1265 flat slat curtain with vinyl jamb seal and internal hood baffle.

Operation: Manual push-up, chain hoist motor operation.

Safety: Safety reversing edges, radio control systems, inertia brakes and security stations are optional.

Guides: (A) Standard three structural steel angles powder coated and bolted together to form a curtain guide channel and jamb mounting surface with flared bellmouths, removable curtain stops and removable service cutouts. (B) Optional two-piece rolled galvanized steel shapes forming a guide channel and jamb mounting surface. Stamped curtain endlocks are standard with roll-formed guides.

Hood: Half hexagonal shape fabricated from minimum 24 gauge prefinished galvanized steel with intermediate structural supports furnished as required per design.

Locking: (A) Wall-mounted chain keeper. (B) Plated steel slide bolt locks with padlock provisions. Cylinder locking.

Finish: (A) Curtain slats and hood are hot-dipped galvanized, per ASTM A653, with baked-on epoxy primer and polyester finish coat. Color to be selected from manufacturer's standard paint finishes (orange, tan, white, gray, bronze), 188 standard powder coat colors or custom powder coat colors. (B) Headplates, steel bottom bar and guides: Low gloss black powder coat. (C) Stainless steel finish: No. 4 satin. (D) Galvalume finish: Galvanized curtain with clear polyester finish coat. (E) Aluminum: Clear anodized.

Wind Load: All doors are manufactured to a minimum standard wind load of 20 PSF. Greater wind load capabilities are available as required.

Warranty: Provide manufacturer's standard three year warranty from date of purchase against defects in materials and workmanship. Springs are warranted for 20,000 cycles.

Installation: Clopay rolling steel doors shall be installed and adjusted according to factory installation instructions by trained Houston Overhead Door system technicians.

Rolling Steel Doors - Medium Duty

  • Increased windload designs
  • Weatherstrip package (available on CMD16 only)
  • Motor operation
  • Hood: 24 gauge, square prefinished galvanized steel
  • Wall-mount motor cover
  • Powder coat finish


OPTIONS

  • Aluminum, stainless steel curtains, guides and bottom bars
  • Universal brackets for hoist and gearhead operators
  • High cycle spring and operation designs
  • Safety reversing systems
  • Windload upgrades
  • In-house powder coating & finish upgrades
  • Operational upgrades
  • Large run paint color specials
  • Access control upgrades


COLORS

Clopay's coiling steel doors come standard in a choice of four colors: tan, white, gray, bronze, plus Galvalume®.

Each standard color is a two-part baked-on system that has been formulated to withstand the most stringent conditions. Our standard paint finish has a 25 year film integrity warranty, guaranteed to hold up against peeling, cracking, blistering, flaking, splitting or delaminating.

These colors are also guaranteed not to fade or change color for 25 years.* Standard colors are not available on all slat styles or gauges. Color chips are available on request.

MODELS

CMD15 - Standard features of the CMD Series are found only as options on most products in this category, setting it apart as a revolutionary closure where strength and value are primary concerns. You will discover that innovation and application are demonstrated perfectly in the CMD Series. The CMD15, with a 24 gauge curved slat, not only comes in four standard colors plus Galvalume®, but is also available in a choice of 188 powder coat colors.

CMD16 - This model has all the same product features of the CMD15 except the slat profile is 24 gauge flat slats. The CMD16 has an optional guide weather-seal and hood baffle available to help deter wind and debris from entering the building.
Model

MAIN FEATURES

  • Prefinished 24 gauge galvanized steel curtain with a two-part baked-on finish paint system for maximum durability and corrosion resistance
  • Interlocking roll-formed steel slats in your choice of curved (CMD15) or flat (CMD16) designs, which may be repaired or replaced with standard parts
  • Curtains designed for openings up to 14' wide x 14' high
  • Minimal headroom and sideroom requirements ensure greatest design efficiencies
  • Weatherstripping available for CMD16 doors as vinyl guide seal
  • Unique 12" O.D. barrel assembly provides superior deflection resistance and unequalled balance characteristics
  • Guide channels are heavy gauge, roll-formed galvanized shapes suitable for windlocking in larger sizes and higher windload demands
  • Bottom bar is an extruded aluminum shape that accepts most bottom astragals and electrical safety edges
  • Bottom astragal is compressible loop-type and standard on all CMD Series doors
  • Zinc plated inside locking slide bolts that may be padlocked are provided for each side of the curtain
  • Chain hoist operation is standard with motor or manual operation optional
  • Optional hood enclosure is a prefinished, square shape that provides protection from debris and damage
  • Unparalleled one year warranty is standard for all CMD Series doors
  • Nationwide network of dealers ensures professional installation and setup

SPECIFICATIONS

Curtain: Prefinished galvanized steel constructed of interlocking slats roll-formed from 24 gauge steel. Curtain slats are staked or windlocked at each end to prevent lateral movement. Slat profile available in choice of flat (CMD16): 2.63" high by .66" deep, or curved (CMD15): 1.97" high by .53" deep.

Curtain Windlocks: As required per design to meet windload specifications.

Bottom Bar: Mill finish aluminum extrusion with tubular compression style bottom astragal.

Barrel Assembly: Galvanized spiral wound 12" O.D. tube. Deflection under full load not to exceed .03" per foot of span supported by shielded bearings mounted to torsion shaft.

Springs: Stress relieved, grease packed and mounted on steel torsion shafts, engineered for minimum 20,000 cycles.

Jamb Brackets: Triangulated galvanized steel shapes mounting to structural jamb surface to support barrel and curtain assembly.

Tension Mechanism: Externally accessible for full range of curtain balance adjustment.

Hood: Optional. 24 gauge, square shaped prefinished steel to cover barrel and curtain assembly and protect from debris and damage. Hood baffle is optional on CMD16. Intermediate hood support(s) furnished as required.

Guides: Formed steel box shapes for face mount to steel, gypsum, wood or masonry. Polyethylene guide runners mounted to guide contact surfaces provide a self-lubricating wear channel for curtain operation. Guide assembly includes removable curtain stops and flared guides.

Weatherstripping: Exterior vinyl guide seal, compression type bottom bar astragal and dual-durometer header seal. Weatherstripping is optional.

Operation: Manual push-up, chain hoist, or motor operation. Safety reversing systems, radio control systems and security stations are optional.

Locking: Two zinc plated steel slide bolt locks with padlock provisions, coil side.

Finish: Curtain slats and optional hood are hot-dipped galvanized, per ASTM A653, with baked-on epoxy primer and polyester finish coat. Available in tan, white, gray, bronze, and Galvalume®. Guides and jamb brackets are galvanized. Bottom bars are mill finish aluminum.

Warranty: Provide manufacturer's standard one year warranty from date of purchase against defects in materials and workmanship. Springs are warranted for one year from date of purchase.

Installation: Clopay rolling steel doors shall be installed and adjusted according to factory installation instructions by trained Houston Overhead Door system technicians.

 

 

 




Become a fan of HOD on FaceBook! Follow HOD on Twitter! Share and Contribute to our Blog Click here for a free quote now!

Houston Overhead Door

We are the full service garage door company, providing Sales and Service for both Commercial Doors and Residential Operators.
7450 Fairbanks N. Houston Rd. Houston, TX
Phone: 713-343-6099